Rear Oil Seal (CAMARO & Firebird): Removal
WARNING: This page is about a different car, the 2002 Pontiac Firebird, 2002 Chevrolet Corvette, and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
Remove the propeller shaft. See appropriate DRIVESHAFT & UNIVERSAL JOINTS article in DRIVE AXLES. Remove the main shaft seal using Slide Hammer with Bearing Adapter (J-23907) and Bushing and Bearing Remover 3-4" (J-26941). See Fig 1 .