LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Automatic Transmission Service) >> Removal & Installation >> Vent Hose >> Installation

Vent Hose: Installation

WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the ventilation hose to the vehicle. Install the first vent hose clip 4" (100 mm) behind the rear edge of the torque arm bracket. Install the lower vent hose clip onto the bottom edge of the torque arm. See Figure .
  2. Install the vent hose to the transmission ventilation tube at the transmission. See Figure . Install the transmission support member. Remove the transmission jack. Lower the vehicle.
scientia non olet · About LEMON Manuals