Vehicle Speed Sensor: Removal

WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.

Raise and suitably support the vehicle. Disconnect the vehicle speed sensor electrical connector. See Fig 1 . Remove the vehicle speed sensor bolt (2). See Fig 2 . Remove the vehicle speed sensor (1) and the O-ring seal (3). Use a suitable container in order to catch any transmission fluid that may spill. Inspect the transmission speed sensor for the following defects:
- Cracks.
- Nicks.
- Damage.

Fig 1: Disconnecting Vehicle Speed Sensor Harness Connector

Courtesy of GENERAL MOTORS CORP.

Fig 2: Removing & Installing Vehicle Speed Sensor

Courtesy of GENERAL MOTORS CORP.