LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Automatic Transmission Service) >> Removal & Installation >> Transmission Mount >> Installation

Transmission Mount: Installation

WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the mount to the transmission. Install the bolts that secure the mount to the transmission. See Figure . Tighten the bolts to specification. See TORQUE SPECIFICATIONS  . Install the transmission support to the vehicle.
  2. Install the bolts that secure the transmission support to the vehicle. Tighten the transmission support bolts to specification. See TORQUE SPECIFICATIONS  . Install the nut that secures the mount to the transmission support. See Figure . Tighten the mount-to-transmission support nut to specification. See TORQUE SPECIFICATIONS  . Remove the transmission jack. Lower the vehicle.
scientia non olet · About LEMON Manuals