LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Engine Mechanical - 5.7L) >> Removal & Installation >> Valve Covers >> Notes

Valve Covers: Notes

WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
  • All gasket surfaces should be free of oil and other foreign material during assembly. DO NOT reuse the valve rocker arm cover gasket. Install a NEW gasket during assembly.
  • The valve rocker arm cover bolt grommets may be reused. If the Positive Crankcase Ventilation (PCV) valve grommet has been removed from the rocker arm, install a NEW grommet during assembly.
  • Remove the ignition coils from the bracket before cleaning the bracket in solvent. DO NOT submerge the ignition coils in solvent.
  • DO NOT remove the oil fill tube from the cover unless service is required. If the oil fill tube has been removed from the rocker arm cover, install a NEW tube during assembly.
scientia non olet · About LEMON Manuals