LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Engine Mechanical - 5.7L) >> Removal & Installation >> Radiator Hoses >> Removal (Inlet)

Removal (Inlet)

WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Drain the cooling system. See DRAINING & FILLING COOLING SYSTEM .
  2. Disconnect the Intake Air Temperature (IAT) sensor and Mass Air Flow (MAF) sensor harness connectors. See Figure. Remove the air cleaner outlet duct. Reposition the radiator inlet hose clamp from the radiator.
  3. Remove the radiator inlet hose from the radiator. Reposition the inlet hose clamps from the power steering cooler, if equipped. Remove the inlet hoses from the power steering cooler, if equipped.
  4. Reposition the radiator inlet hose clamp from the water pump. Remove the radiator inlet hose from the water pump.
scientia non olet · About LEMON Manuals