LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Engine Mechanical - 5.7L) >> Removal & Installation >> Fan Shroud >> Removal

Fan Shroud: Removal

WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the Intake Air Temperature (IAT) sensor and Mass Airflow (MAF) sensor. See Figure. Remove the air cleaner outlet duct.
  2. Release the retaining strap latches. Lift the air cleaner housing cover off. Remove the air cleaner element. Remove the radiator support bolts and the radiator support.
  3. Remove the wiring harness from the rosebud clips on the fan shroud. Disconnect the cooling fan electrical components.
  4. Raise and suitably support the vehicle. Remove the fan shroud.
scientia non olet · About LEMON Manuals