Crossover Pipe: Removal
WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and suitably support the vehicle.
- Remove the catalytic converter hanger bolts. Remove the catalytic converter hanger.
- Loosen the left side and right side exhaust manifold pipe nuts. See Figure and Figure . Remove the left side and right side catalytic converter nuts.
- Slide the crossover pipe rearward. Remove the crossover pipe off the studs on the left and right side catalytic converters. Slide the crossover pipe out of the exhaust muffler.