LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Engine Mechanical - 5.7L) >> Removal & Installation >> Air Conditioning Drive Belt >> Removal

Air Conditioning Drive Belt: Removal

WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the accessory drive belt. See ACCESSORY DRIVE BELT .
  2. Install a breaker bar with hex-head socket to the air conditioning (A/C) belt tensioner bolt. Rotate the A/C belt tensioner clockwise in order to relieve tension on the belt.
  3. Remove the A/C belt from the pulleys. See Figure. Slowly release the tension on the A/C belt tensioner.
  4. Remove the breaker bar and socket from the A/C belt tensioner bolt. Clean and inspect the belt surfaces of all the pulleys.
scientia non olet · About LEMON Manuals