LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Engine Mechanical - 5.7L) >> Removal & Installation >> Air Conditioning Drive Belt >> Installation

Air Conditioning Drive Belt: Installation

WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the A/C belt around the crankshaft balancer.
  2. Install a breaker bar with hex-head socket to the A/C belt tensioner bolt. Rotate the A/C belt tensioner clockwise in order to relieve on the tensioner.
  3. Install the A/C belt under the idler pulley. Install the A/C belt over the A/C compressor pulley.
  4. Slowly release the tension on the A/C belt tensioner. Remove the breaker bar and socket from the A/C belt tensioner bolt.
  5. Inspect the A/C belt for proper alignment. Install the accessory drive belt. See ACCESSORY DRIVE BELT .
scientia non olet · About LEMON Manuals