LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 30 (Engine Mechanical - 5.7L) >> Engine Oiling >> Oil Level Indicator Tube >> Removal

Oil Level Indicator Tube: Removal

WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the No. 4 and 6 spark plug wires.
    • Twist the plug wire 1/2 turn.
    • Pull only on the boot in order to remove the wire from the spark plug.
  2. Remove the No. 4 and 6 ignition coils from the coil bracket.
  3. Remove the oil level indicator from the indicator tube. See Figure. Remove the oil level indicator tube bolt. Remove the indicator tube from the engine block. Remove the "O" ring seal from the tube, if required. Inspect the "O" ring seal for cuts or damage. The "O" ring may be reused if not cut or damaged.
scientia non olet · About LEMON Manuals