LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 23 (Disc Brakes) >> Removal & Installation >> Power Brake Booster >> Removal

Power Brake Booster: Removal

WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove hood rear seal. Remove left side air inlet screen. Remove brake booster hose and clamp from check valve. Remove master cylinder from brake booster. Remove left side instrument panel insulator.
  2. Remove brake pedal nuts from brake booster. On vehicles equipped with M/T, loosen clutch master cylinder nuts. On all models, disconnect brake booster pushrod from brake pedal lever pin. Remove pushrod retainer and washer, from inside vehicle. Remove power brake booster.
scientia non olet · About LEMON Manuals