Parking Brake
WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
- Apply and release parking brake three times. Raise and support vehicle. Release parking brake completely. Remove rear tires. Remove rear brake rotors. See REAR B RAKE ROTOR under REMOVAL & INSTALLATION.
- Position Brake Shoe Adjustment Gauge (J-21177A) onto widest point of brake rotor and tighten set screw. Turn adjusting screw until park brake shoe contacts adjustment gauge. Install rear brake rotors. See REAR BRAKE ROTOR under REMOVAL & INSTALLATION. Install tires.
- Set and release parking brake three times. Apply parking brake. Ensure wheels DO NOT rotate. With parking brake released, ensure wheels rotate forward.