LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 22 (HVAC Systems - Manual) >> Removal & Installation >> Temperature Cable >> Removal

Temperature Cable: Removal

WARNING: This page is about a different car, the 2002 Pontiac Firebird and 2002 Chevrolet Camaro. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the right Instrument Panel (I/P) insulator. Remove the temperature control cable bolt. Disconnect the temperature control cable from the HVAC module assembly.
  2. Remove the accessory trim plate. See HVAC CONTROL ASSEMBLY . Remove the HVAC control assembly screws. Remove the HVAC control assembly from the I/P to access the temperature control cable connection.
  3. When releasing the control cable clips, use a small screwdriver to remove the cable from the control. Remove the temperature control cable from the HVAC control assembly. See Figure.
scientia non olet · About LEMON Manuals