LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Supplemental Inflatable Restraint Systems) >> Removal & Installation >> Air Bag Modules >> Removal Driver-side

Removal Driver-side

WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, See AIR BAG SAFETY PRECAUTIONS  . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM  .
  2. Remove 4 screws retaining driver-side air bag to steering wheel. Partially remove driver-side air bag module and disconnect SIR connector from back of air bag. Disconnect horn wiring harness from steering column. Disconnect ground wire from steering column. Remove driver-side air bag from vehicle. See Figure .
scientia non olet · About LEMON Manuals