LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Supplemental Inflatable Restraint Systems) >> Diagnostic Tests >> DTC B1001: Option Configuration Error >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. If SIR Diagnostic System Check has been performed, go to next step. If SIR Diagnostic System Check has not been performed, go to SIR DIAGNOSTIC SYSTEM CHECK  .
  2. Install scan tool to DLC. Using scan tool, verify PCM VIN matches vehicle VIN. If VIN numbers match, go to step  4 . If VIN numbers do not match, go to next step.
  3. Using scan tool, reprogram PCM to match vehicle VIN. Go to step  6 .
  4. If BCM was replaced, reprogram BCM. If BCM was not replaced, go to next step.
  5. Turn ignition off. Replace SDM. See SENSING & DIAGNOSTIC MODULE (SDM)  under REMOVAL & INSTALLATION.Go to next step.
  6. Reconnect all SIR components. Ensure that all components are properly mounted. Go to SIR DIAGNOSTIC SYSTEM CHECK  .
scientia non olet · About LEMON Manuals