LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 19 (Supplemental Inflatable Restraint Systems) >> Diagnostic Tests >> DTC B0051: Deployment Commanded >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. If SIR Diagnostic System Check has been performed, go to next step. If SIR Diagnostic System Check has not been performed, go to SIR DIAGNOSTIC SYSTEM CHECK  .
  2. Turn ignition off. If air bags have deployed, go to step  5 . If air bags have not deployed, go to next step.
  3. Inspect front of vehicle and undercarriage for signs of impact. If impact has occurred, go to step  5 . If no impact has occurred, go to next step.
  4. Replace SDM. See SENSING & DIAGNOSTIC MODULE (SDM)  under REMOVAL & INSTALLATION. Go to step  6 .
  5. Install scan tool. Request SIR DTC display. If DTC is retrieved, diagnose specific DTC. Replace components and perform inspections as required following an accident.
  6. Reconnect all SIR components. Ensure that all components are properly mounted. Use scan tool to clear DTCs. Go to SIR DIAGNOSTIC SYSTEM CHECK  .
scientia non olet · About LEMON Manuals