LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Supplemental Inflatable Restraint System) >> Diagnostic Tests >> DTC B0079: Incorrect Driver-Side Sis Installed >> Diagnostic Procedure

Diagnostic Procedure

WARNING: This page is about a different car, the 2000 Buick Park Avenue. However, it is still accessible from the selected car via links, so may be relevant.
  1. If SIR Diagnostic System Check has been performed, go to next step. If SIR Diagnostic System Check has not been performed, go to SIR DIAGNOSTIC SYSTEM CHECK .
  2. Turn ignition off. Install scan tool. Turn ignition on. Using scan tool, check for SIR DTCs. If DTC B0079 is retrieved, go to next step.
  3. Replace driver-side SIS. See SIDE IMPACT SENSOR (SIS)  under REMOVAL & INSTALLATION. Go to next step.
  4. Reconnect all SIR components. Ensure that all components are properly mounted. Clear all SIR DTCs. Go to SIR DIAGNOSTIC SYSTEM CHECK .
scientia non olet · About LEMON Manuals