LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 14 (Starting System) >> System Tests >> Engine Does Not Crank, Starter Solenoid Clicks

Engine Does Not Crank, Starter Solenoid Clicks

WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch to START position. If starter solenoid clicks and engine does not crank, go to next step. If starter solenoid does not click, go to ENGINE DOES NOT CRANK, STARTER SOLENOID DOES NOT CLICK  .
  2. Inspect engine and belt drive system for mechanical binding. Repair as necessary. If engine moves freely, go to next step.
  3. Check positive battery cable between starter and underhood fuse block for an open or high resistance. Repair as necessary and retest operation. If positive battery cable checks okay, go to next step.
  4. Check starter motor ground circuit for high resistance. See WIRING DIAGRAMS  . Repair as necessary and retest operation. If starter motor ground circuit checks okay, go to next step.
  5. Check for poor connections at starter solenoid. Repair as necessary and retest operation. If starter solenoid connections are okay, replace starter. See STARTER  under REMOVAL & INSTALLATION. Retest operation.
scientia non olet · About LEMON Manuals