LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (Power Seat System) >> Removal & Installation >> Seat Adjuster Motors >> Installation

Seat Adjuster Motors: Installation

WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.
  1. Position adjuster motor and wiring harness to seat frame. Reconnect drive cables to 2 rear motors and adjuster. Install rear motor mounting screws. Install front motor to bracket. Reconnect harness connectors.
  2. Position bracket onto one adjuster motor. Insert drive cable into motor, and then into transmission (turn cable as necessary to allow cable to slide into transmission).
  3. Repeat previous step to install other adjuster motor. Bend bracket ends outward enough to prevent bracket from sliding off transmissions. To complete installation, reverse removal procedure.
scientia non olet · About LEMON Manuals