Diagnostic Aids

WARNING: This page is about a different car, the 2000 Chevrolet Corvette. However, it is still accessible from the selected car via links, so may be relevant.

If DTC does not reset after code is cleared, problem may be intermittent. While performing tests, move wires and connectors. Following conditions may also cause an intermittent malfunction:

Intermittent open, short to voltage or short to ground in Black/White, Dark Green or Gray wire circuit between mirror and LDCM.
Left mirror vertical position sensor is open or shorted internally.

If LDCM is unable to determine correct vertical position, manual power functions will still operate but LDCM will not be able to recall correct memory settings.