LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Removal & Installation, Overhaul >> Fuel Systems >> Fuel Rail & Injectors >> Removal (5.7L)

Removal (5.7L)

  1. Relieve fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Disconnect negative battery cable. Remove resonator and resonator bracket. Disconnect quick-connect fitting at fuel rail inlet and return lines.
  2. Disconnect accelerator cable from throttle body and accelerator cable bracket. Move accelerator cable aside. Disconnect vacuum hose at pressure regulator. Remove vacuum lines (mark for installation reference) as necessary to gain access to fuel rail and fuel lines. Remove electrical harness from routing clips on fuel rail.
  3. Remove fuel line retaining bolt. Disconnect harness connectors from injectors. Remove fuel rail retaining bolts. Remove fuel rail from intake manifold using equal force on both sides of fuel rail. See Figure. Remove injector-to-fuel rail retaining clip. Remove injector from fuel rail. Remove injector "O" rings and discard.
scientia non olet · About LEMON Manuals