LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Removal & Installation, Overhaul >> Fuel Systems >> Fuel Rail & Injectors >> Removal (1.8L)

Removal (1.8L)

  1. Relieve fuel pressure. See FUEL SYSTEM PRESSURE RELEASE . Disconnect negative battery cable. Disconnect 4 spark plug wires from 2 ignition coils. Disconnect PCV and breather hoses from valve cover. Remove nut and accelerator cable bracket from cylinder head.
  2. Remove nuts and bolt from wire harness cover plate and remove cover plate. Disconnect harness connectors from injectors. See Figure. Remove 2 bolts and pull back wiring harness. Disconnect and plug fuel line. Remove fuel line hold-down bolt.
  3. Remove 2 fuel rail retaining bolts. Remove fuel rail from cylinder head. Remove 2 fuel rail spacers from cylinder head. Remove injectors from fuel rail. Remove injector "O" rings and discard.
scientia non olet · About LEMON Manuals