LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Removal & Installation, Overhaul >> Fuel Systems >> Fuel Gauge Select Switch >> Removal & Installation (2.2L - Cavalier - CNG)

Removal & Installation (2.2L - Cavalier - CNG)

  1. Disable SIR system. See appropriate AIR BAG RESTRAINT SYSTEMS article in ACCESSORIES & EQUIPMENT. Remove instrument panel trim pad. Remove defroster grille screw. Using a flat-bladed tool, remove defroster grille from Instrument Panel (IP) trim pad. Remove IP outer trim cover screws. Remove IP outer trim covers. Open glove compartment and remove right IP trim plate bezel. Remove IP trim pad screws and remove IP trim pad from IP carrier.
  2. Remove screws from IP trim plate and remove IP accessory trim plate by pulling rearward to disengage retainers. Disconnect electrical connectors from trim plate. Remove fuel gage select switch from trim plate. To install, reverse removal procedure.
scientia non olet · About LEMON Manuals