LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Control System - Removal & Installation, Overhaul >> Cooling System >> Cooling System Bleeding >> (1.3L, 1.8L, 1.9L, 2.2L, 2.4L, 3.0L, 3.1L, 3.4L & 3.8L)

(1.3L, 1.8L, 1.9L, 2.2L, 2.4L, 3.0L, 3.1L, 3.4L & 3.8L)

CAUTION: Avoid spilling coolant mixture on engine parts. Coolant may cause undue corrosion. If coolant is spilled during procedure, rinse area with clean water.
  1. Fill radiator to base of radiator filler neck. Fill coolant reservoir to FULL mark on reservoir. On 2.4L models, open coolant air bleed valve until a continuous stream of coolant flows from valve. Install reservoir hose to reservoir cap. Operate engine until coolant reaches operating temperature. Operating temperature is reached when, hoses feel warm and when coolant flows through radiator.
  2. Add coolant to radiator until coolant level reaches radiator filler neck. Install radiator cap.
scientia non olet · About LEMON Manuals