LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.8L V6 (VIN K) >> Removal & Installation >> Water Pump >> Removal & Installation (Supercharged "C" & "H" Bodies)

Removal & Installation (Supercharged "C" & "H" Bodies)

  1. Disconnect negative battery cable. Remove A/C compressor splash shield. Loosen water pump pulley bolts. Drain cooling system. Remove drive belts. Remove coil pack. Remove supercharger belt tensioner.
  2. Remove engine mount. Remove power steering pump. Remove engine mount bracket. Remove idler pulley. Remove water pump pulley. Remove water pump and gasket. To install, reverse removal procedure using NEW gasket. Fill and bleed the engine cooling system. See COOLING SYSTEM BLEEDING .
scientia non olet · About LEMON Manuals