LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.8L V6 (VIN K) >> Removal & Installation >> Water Pump >> Removal & Installation (Non Supercharged "C" & "H" Bodies)

Removal & Installation (Non Supercharged "C" & "H" Bodies)

Drain cooling system. Loosen water pump pulley bolts. Remove drive belt. Remove water pump pulley bolts and pulley. Remove water pump and gasket. To install, reverse removal procedure using NEW gasket. Fill and bleed cooling system. See COOLING SYSTEM BLEEDING .

scientia non olet · About LEMON Manuals