LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.8L V6 (VIN K) >> Removal & Installation >> Thermostat Replacement >> Removal Procedure

Removal Procedure

  1. Remove the fuel injector sight shield.
  2. Drain the cooling system. Refer to Draining and Filling Cooling System
  3. Remove the air cleaner intake duct.
  4. Use the J 38185 to reposition the hose clamp from the water outlet housing.
  5. Remove the radiator inlet hose from the water outlet housing.
    6. Fig 1: Radiator Inlet Hose From The Water Outlet Housing
    G01764798Courtesy of GENERAL MOTORS CORP.
  6. Remove from the water outlet housing bolts.
  7. Remove the water outlet housing and gasket.
  8. Remove the thermostat.
    Fig 2: Thermostat (3.8L)
    G01764799Courtesy of GENERAL MOTORS CORP.
  9. Clean the water outlet gasket mating surfaces.
scientia non olet · About LEMON Manuals