LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.8L V6 (VIN K) >> Removal & Installation >> Thermostat Replacement >> Installation Procedure

Installation Procedure

  1. Install the thermostat.
    Fig 1: Thermostat (3.8L)
    G01764800Courtesy of GENERAL MOTORS CORP.
  2. Install the gasket and the water outlet housing.
  3. Install the water outlet housing bolts.

    Tighten: 

    Tighten the bolts to 27 N.m (20 ft lbs) 

  4. Install the radiator hose to the water outlet housing. Use the J 38185 to reposition and install the hose clamp to the water outlet housing.
  5. Install the air cleaner intake duct.
  6. Fill the cooling system. Refer to Draining and Filling Cooling System
  7. Install the fuel injector sight shield.
  8. Inspect for leaks.
scientia non olet · About LEMON Manuals