LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.8L V6 (VIN K) >> Removal & Installation >> Engine Mount Replacement >> "H" Body >> Removal

"H" Body: Removal

  1. Raise and support the vehicle.
  2. Support the engine assembly with a suitable jack.
    3. Fig 1: Identifying Engine Mount Bracket
    G00515993Courtesy of GENERAL MOTORS CORP.
  3. Remove the nut securing the engine mount to the engine mount bracket.
  4. Lower the jack allowing the engine to lower slightly.
    1. Remove the bolt (4) securing the mount to the frame.
    2. Remove the two nuts (2) securing the mount to the frame.
    3. Remove the mount (3).
      4. Fig 2: Identifying Engine Mount-To-Frame Bolts
      G00515994Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals