LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.8L V6 (VIN K) >> Removal & Installation >> Engine Mount Replacement >> "H" Body >> Installation

"H" Body: Installation

  1. Install the mount (3).
  2. Install the mount attaching bolt (4) and nut (1) to the frame.
    3. Fig 1: Identifying Engine Mount-To-Frame Bolts
    G00515994Courtesy of GENERAL MOTORS CORP.
  3. Install the two nuts (2) securing the mount to the frame. Tighten the nuts (1,2) to 70 Nm (52 lb ft).
  4. Raise the engine into position.
    1. Install the nut to the mount and mount bracket. Tighten the mount nut to 80 Nm (59 lb ft).
    2. Remove the engine support jack.
    3. Lower the vehicle.
    Fig 2: Identifying Engine Mount Bracket
    G00515993Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals