LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.8L V6 (VIN K) >> Overhaul >> Cylinder Head >> Valve Spring Installed Height

Valve Spring Installed Height

  1. Install valve, valve retainer and keepers. Pull upward on valve, and measure height from top of spring seat to spring side of valve retainer. See Figure.
  2. Ensure spring installed height is within specification. See VALVES & VALVE SPRINGS  table under ENGINE SPECIFICATIONS. If measurement exceeds specification, add shims under valve spring to obtain correct height.
scientia non olet · About LEMON Manuals