LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Mechanical - 3.8L V6 (VIN K) >> Overhaul >> Cylinder Head >> Inspection

Cylinder Head: Inspection

  1. Inspect cylinder head for warpage at deck and manifold surfaces. Resurface cylinder head if warpage exceeds specification. See CYLINDER HEAD  table under ENGINE SPECIFICATIONS.
  2. After resurfacing, use a depth micrometer to measure distance from deck surface to 3 cast pads. See Figure. Replace cylinder head if dimension is less than .044" (1.12 mm). New cylinder head dimension should be .054-.066" (1.37-1.68 mm).
scientia non olet · About LEMON Manuals