Test F: Low Traction Indicator Inoperative (Intrigue)
- Perform DIAGNOSTIC SYSTEM CHECK under DIAGNOSIS & TESTING. Go to next step.
- Using scan tool, enter INSTRUMENT PANEL SPECIAL FUNCTIONS. Attempt to turn LOW TRAC indicator on. If LOW TRAC indicator turns on, go to next step. If LOW TRAC indicator does not turn on, go to step 4 .
- Replace EBCM. See ELECTRONIC BRAKE CONTROL MODULE under REMOVAL & INSTALLATION. After repairs, perform DIAGNOSTIC SYSTEM CHECK under DIAGNOSIS & TESTING.
- Turn ignition switch to OFF position. Check LOW TRAC indicator bulb. See appropriate ANALOG INSTRUMENT PANELS article in ACCESSORIES & EQUIPMENT. If LOW TRAC bulb is okay, go to step 6 . If LOW TRAC bulb is not okay, go to next step.
- Replace LOW TRAC indicator bulb. See appropriate ANALOG INSTRUMENT PANELS article in ACCESSORIES & EQUIPMENT. After repairs, perform DIAGNOSTIC SYSTEM CHECK under DIAGNOSIS & TESTING.
- Replace Instrument Panel Cluster. See appropriate ANALOG INSTRUMENT PANELS article in ACCESSORIES & EQUIPMENT. After repairs, perform DIAGNOSTIC SYSTEM CHECK under DIAGNOSIS & TESTING.