Camaro & Firebird
NOTE:
Adjust cruise control release switch and stoplight and Torque Converter Clutch (TCC) switch at same time.
- Depress brake. Insert cruise control release switch and stoplight and TCC switch into pedal with bracket until retainers on switches are fully seated.
- Slowly pull brake pedal rearward with a force of 50 lbs (222 N) until clicking sounds are no longer heard. At this point, retainers on switches will be adjusted.
- Measure cruise control release switch and stoplight and TCC switch. Switch contacts should be open at 1.0" (25.4 mm) or less of pedal travel. Switch contacts should be open at same time or before onset of braking. Brake pedal travel can be up to 1.0" (25.4 mm) before cruise control system disengages.
NOTE:
Apply proper amount of force to brake pedal during adjustment. Too much force may damage vacuum booster. Too little force may cause brakes to drag.