LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc Brakes >> Removal & Installation >> Rear Brake Rotor >> Removal & Installation

Removal & Installation

  1. Raise and support vehicle. Mark wheel in relation to wheel studs. Remove wheel. Remove 2 caliper mounting bracket bolts. Discard bolts. Remove caliper mounting bracket with caliper attached and wire aside. See REAR BRAKE CALIPER  . Mark rotor in relation to hub for installation reference.
  2. Remove rotor. To install, reverse removal procedure. Install NEW mounting bracket bolts. Tighten nuts and bolts to specification. See TORQUE SPECIFICATIONS  .
scientia non olet · About LEMON Manuals