LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Removal & Installation >> Power Seat >> Removal

Power Seat: Removal

  1. Put a protective shield over nearby trim and paint. Position front seat to full upward and midway position. Remove screws from inner and outer front nut covers, remove the covers. Remove screw from inner and outer rear nut cover, and remove cover.
  2. Remove screw from rear outer nut cover. Remove seat adjuster nuts from studs. Disconnect seat belt wiring harness electrical connector. Remove lumbar seat air supply hose. Remove seat from vehicle.
scientia non olet · About LEMON Manuals