LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Removal & Installation >> Power Seat Switch >> Installation

Power Seat Switch: Installation

  1. Install seat switch to trim cover. Install screws to seat switch. Tighten screws to 1.7 N.m (15 lb in). Connect wiring harness connector to seat switch. Install seat trim cover and screws. Tighten screws to 1.7 N.m (15 lb in). Install front seat. See POWER SEAT  under Removal & Installation.
scientia non olet · About LEMON Manuals