LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Removal & Installation >> Power Seat Adjuster Assembly >> Installation

Power Seat Adjuster Assembly: Installation

  1. Install adjuster covers and adjuster cover bolts, if necessary. Tighten bolts to 1.7 N.m (15 lb in). Install adjuster track and bolts. Tighten bolts to 24 N.m (18 lb ft). Install motor support and nut. Tighten nut to 4 N.m (35 lb in). Install drive cables. Install front seat. See POWER SEAT  under Removal & Installation.
Fig 1: Power Seat Adjuster Assembly
G95I35152Courtesy of GENERAL MOTORS CORP.
Fig 2: Removing Adjuster Assembly Components
G95A35154Courtesy of GENERAL MOTORS CORP.
scientia non olet · About LEMON Manuals