LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Removal & Installation >> Power Seat Adjuster Assembly >> Disassembly & Reassembly

Disassembly & Reassembly

WARNING: Place adjuster in a bench vise before removing rear vertical adjuster, or ejection of compressed assist spring may cause personal injury.

Place adjuster in a bench vise. Remove rear adjuster nut. See Figure . Slowly open vise to relieve spring compression, and remove rear adjuster and vertical assist spring. Remove front adjuster nut. Remove bolts/screws and horizontal actuator. Remove front and rear vertical actuators. Repeat procedure for other adjuster. To assemble, reverse disassembly procedure.

scientia non olet · About LEMON Manuals