LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Body & Frame >> Ignition Switch/Steering Lock >> Steering Wheel & Steering Column >> Removal & Installation >> Steering Wheel Controls >> Installation

Steering Wheel Controls: Installation

  1. Install the wire harness connector to the controls. Install the radio control switch to the steering wheel. Press in the radio control switch in at the lower edge. Connect the redundant radio control electrical connector. Install the redundant radio control connector to the steering wheel retainer. Enable air bag system. See appropriate AIR BAG RESTRAINT SYSTEMS article.
scientia non olet · About LEMON Manuals