Cruise Control Cable (5.7L Engine): Installation
- Inspect the cable end to insure the O-ring is in place. Connect cable bead to the module ribbon. Remove shipping retainer. Pull the throttle body end of the cable until the cable is tight. Snap the cable end into the module and ensure the conduit tangs are engaged. Install the cable locking retainer to the module.
- Align the cruise control module cover over the cable and bracket. Snap the cover closed over the flanges on the bracket. Install the cruise control module shield. Install the cruise control module shield bolts and nut. Tighten the bolts to 53 INCH lbs. (6 N.m), and the nut to 20 ft. lbs. (27 N.m). Connect the cruise control cable rosebud clip to the brake pipe clip. Install the left front bumper fascia lower deflector. Snap the cruise control cable into the accelerator control cable clip.
- Lower the vehicle. Install the cruise control cable clip to the brake booster. Install the cruise control cable under the accelerator/cruise control cable servo bracket. Rotate the upper cam, and install the cruise control cable slug to the servo cable adjuster. Slide the cable onto the slot, ensure locking tab is snapped into position. Slide the cruise control servo cable adjuster cover down and snap into place. Adjust cruise control cable. See CRUISE CONTROL CABLE under ADJUSTMENTS.
- Inspect the cable end to insure the O-ring is in place. Connect cable bead to the module ribbon. Remove shipping retainer. Pull throttle body end of the cable until it is tight. Push cable fitting end over the ribbon. Snap cable end into the module. Ensure the conduit tangs are engaged. Install cable locking retainer to module.
- Align the cruise control module cover over the cable and bracket. Snap cover closed over flanges on bracket. Install cruise control module shield. Install cruise control module shield bolts and nut. Tighten the bolts to 53 INCH lbs. (6 N.m), and the nut to 20 ft. lbs. (27 N.m). Connect the cruise control cable rosebud clip to the brake pipe clip. Install the left front bumper fascia lower deflector.
- Lower the vehicle. Install the cruise control cable clip to the brake booster. Install the cruise control cable under the accelerator/cruise control cable servo bracket. Rotate the throttle lever rearward. Snap the cruise control cable end to the throttle lever. Align cable and slide onto slot, locking tab must be snapped into position. Adjust cruise control cable. See CRUISE CONTROL CABLE under ADJUSTMENTS.