LEMON Manuals: Even more car manuals for everyone
Home >> Chevrolet >> 2001 >> Camaro Base, 2D Convertible, Automatic >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Engine Mechanical - 3.8L V6 (VIN K) >> Removal & Installation >> Intake Manifold (Upper) >> Removal

Intake Manifold (Upper): Removal

  1. Release fuel pressure. See FUEL PRESSURE RELEASE . Disconnect negative battery cable. Drain cooling system. Remove air intake duct and air cleaner assembly.
  2. Remove spark plug wires and fuel rail. On "F" body, remove EGR outlet pipe from intake manifold. Remove exhaust crossover heat shield and power steering pump bracket. Remove serpentine belt, generator and generator bracket.
  3. Remove heater pipes and by-pass hose. Remove throttle cable bracket and if necessary, throttle body. Remove intake manifold bolts, manifold, gaskets and seals.
scientia non olet · About LEMON Manuals