Low Washer Fluid Indicator Malfunction
Low Washer Fluid Indicator Malfunction
| Step | Action | Yes | No |
|---|---|---|---|
| 1 | Did you review the Wiper/Washer System Description and Operation and perform the necessary inspections? | Go to Step 2 | Go to Symptoms - Wiper/Washer Systems |
| 2 |
|
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
| 3 | Does the Low Washer Fluid indicator remain ON when the washer solvent container is filled? | Go to Step 4 | Go to Step 6 |
| 4 |
|
Go to Step 9 | Go to Step 5 |
| 5 | Test the low washer fluid indicator control circuit for a short to ground. Refer to Circuit Testing
, and Wiring Repairs
in Wiring Systems. Did you find and correct the condition? |
Go to Step 11 | Go to Step 10 |
| 6 |
|
Go to Step 8 | Go to Step 7 |
| 7 | Test the low washer fluid indicator control circuit for high resistance or an open. Refer to Testing for Intermittent Conditions and Poor Connections
, and Connector Repairs
, or Circuit Testing
, and Wiring Repairs
in Wiring Systems. Did you find and correct the condition? |
Go to Step 11 | Go to Step 10 |
| 8 | Test the ground circuit of the windshield washer solvent level switch for high resistance or an open. Refer to Testing for Intermittent Conditions and Poor Connections
, and Connector Repairs
, or Circuit Testing
, and Wiring Repairs
in Wiring Systems. Did you find and correct the condition? |
Go to Step 11 | Go to Step 9 |
| 9 | Replace the windshield solvent level sensor switch. Did you complete the replacement? |
Go to Step 11 | - |
| 10 | Replace the instrument panel cluster. Refer to Instrument Cluster Replacement
in Instrument Panel, Gauges, and Console. Did you complete the replacement? |
Go to Step 11 | - |
| 11 | Operate the system in order to verify the repair. Did you correct the condition? |
System OK | Go to Step 3 |