Odometer Trip/Reset Switch Inoperative
Odometer Trip/Reset Switch Inoperative
| Step | Action | Value(s) | Yes | No |
|---|---|---|---|---|
| Schematic Reference: Instrument Cluster Schematics | ||||
| 1 | Did you perform the Instrument Cluster Diagnostic System Check? | - | Go to Step 2 | Go to Diagnostic System Check - Instrument Cluster |
| 2 | Press in and release the trip odometer reset switch. Does the odometer display toggle between trip and season odometer? |
- | Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
| 3 | Replace the IPC. Refer to Instrument Cluster Replacement . Did you complete the replacement? |
- | Go to Step 4 | - |
| 4 | Operate the system in order to verify the repair. Did you correct the condition? |
- | System OK | Go to Step 3 |