Conditions for Clearing the DTC
- The DTC becomes history when the fault is no longer present.
- A history DTC clears after 100 malfunction free ignition cycles.
- The DIC receives a clear code command from the scan tool.
DTC B1023
| Step | Action | Yes | No |
|---|---|---|---|
| Schematic Reference: Driver Information System Schematics | |||
| 1 | Did you perform the Driver Information Center Diagnostic System Check? | Go to Step 2 | Go to Diagnostic System Check - Driver Information Systems |
| 2 |
|
Go to Testing for Intermittent Conditions and Poor Connections in Wiring Systems | Go to Step 3 |
| 3 | Replace the DIC. Refer to Driver Information Center Replacement . Did you complete the replacement? |
Go to Step 4 | - |
| 4 |
|
Go to Step 2 | System OK |