Steering Shaft, Lower Bearing, and Jacket - Disassemble - Off Vehicle (Column shift)
- Remove the electronic lock module assembly. Refer to Electronic Column Lock Module - Disassemble - Off Vehicle .
- Inspect the steering column for accident damage.
- Remove the 2 pan head tapping screws from the turn signal and multifunction switch assembly.
Remove the turn signal and multifunction switch assembly.
- Remove the 3 flat head tapping screws from the linear shift assembly.
- Remove the linear shift assembly from the steering column support assembly.
- Remove the adapter and bearing assembly (1) from the steering shaft assembly.
- Remove the steering shaft assembly (1) from the steering column support assembly (2) and the steering column jacket assembly (3).
- Remove the 4 TORX® head screws (1) from the steering column support assembly (2).
- Discard the 4 TORX® head screws (1).
- Remove the steering column support assembly (2) from the steering column jacket assembly (3).
Fig 4: View Of Steering Shaft Assembly, Steering Column Support Assembly & Steering Column Jacket Assembly
Fig 5: View Of TORX(R) Head Screws, Steering Column Support Assembly & Steering Column Jacket Assembly