Powertrain Control Module: Removal
WARNING: This page is about a different car, the 2002 GMC Cab & Chassis Sierra and 2002 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the PCM harness connectors (4) from the PCM (1) by loosening the PCM harness connector bolts (3).
- Release the PCM retaining clip (2) from the PCM (1).
- Slide the PCM (1) out of the PCM mounting bracket (3).
- Remove the PCM (1) from the engine compartment.