Turn Signal Switch Housing - Assemble - Off Vehicle (Tilt)
- Slide the turn signal switch housing onto the steering column shaft assembly.
- Install the turn signal and multifunction switch assembly only. Refer to Turn Signal and Multifunction Switch Assembly - Assemble - Off Vehicle (Floor Shift) , Turn Signal and Multifunction Switch Assembly - Assemble - Off Vehicle (Column Shift) .
- Install the steering column tilt head components. Refer to Steering Column Tilt Head Housing - Assemble - Off Vehicle (Floor Shift) , Steering Column Tilt Head Housing - Assemble - Off Vehicle (Column Shift) .
- Enable the inflatable restraint steering wheel module. Refer to Enabling the SIR System in SIR.
IMPORTANT:
The switch mounting bracket must be pressed firmly against the steering column tilt head.