Removal Procedure
- Disable the SIR system. Refer to Disabling the SIR System in SIR.
- Remove the ignition switch. Refer to Ignition and Key Alarm Switch Assembly - Disassemble - Off Vehicle .
- Remove the turn signal cancel cam. Refer to Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle (Floor Shift) , Turn Signal and Multifunction Switch Assembly - Disassemble - Off Vehicle (Column Shift) .
- Remove the park lock cable from the lock cylinder housing.
- Remove 3 TORX® screws.
- Remove the lock cylinder housing from the steering column.
CAUTION:
Refer to SIR Caution in Cautions and Notices.